Angled bindings other than 90degrees

Hello!

Been a little while since I’ve been here in blogland but I’ve been asked for my method of binding quilts with angles other than 90degrees. There are a few ways to do this but this is my method and as always I do recommend that you try a few ways first before settling on the method that works best for you.

I also use a 3in wide binding rather than the usual 2.5in as I find when binding by machine it allows me a little more wiggle room.

So here we go –

Join your 3in binding strips end to end with 45-degree seams, then trim the seams and press them open. Press the binding strip in half lengthways with the wrong sides facing. With raw edges aligned and mitring the corners as you go, stitch the binding to the back of the quilt top, starting on a straight edge.

When you reach the 120degree corner, stop a 1/4in away from the edge, and then stitch off the edge of the quilt top stitching to the point (photos 1-3). Fold up the binding as shown in photo 4. Fold it back down aligned with the raw edge (photo 5) and continue sewing, repeat on each point that is 120 degrees.

Photo 1

Photo 2

Photo 3

Photo 4

Photo 5

 

When you reach a concave (facing inwards) angle, snip a 1/4in clipped notched into the quilt top (photo 6), angle the quilt top so you are sewing a straight line (photo 7 and 8). This is easing the binding into the angle.

Photo 6

Photo 7

Photo 8

 

When you reach the 60degree corner, stop a 1/4in away from the edge (photo 9), and then stitch off the edge of the quilt top stitching to the point (photos 10 and 11). Fold up the binding as shown in photo 12. Fold it back down aligned with the raw edge (photo 13) and continue sewing, using the techniques for each angle.

Photo 9

Photo 10

Photo 11

Photo 12

Photo 13

 

Trim the surplus backing and batting 3/8in from the stitch line, and then turn the binding to the front and topstitch it in place using photos 14 – 18 to finish the 60 and 120 degree corners.

Photo 14

Photo 15

Photo 16

Photo 17

Photo 18

 

Photos 14/15/16 showed how to roll the binding up to finish the 60-degree point.

Photos 17 and 18 show how to position and finish the 120-degree point.

If you have any questions or would like me to make a video of this method, please let me know in the comments or you can ring 0416 023 637 or email me at frankensteinsfabrics@hotmail.com

Happy quilting!

Marni x